Description
Waterproof Connectors, Size 22 – Size 8 AWG
Waterproof your outdoor splices with the DryConn Medium, Black/Gray wire connector. This quality one-step connector is filled with a dielectric silicone sealant that surrounds splices, making it water & corrosion resistant. This is an ideal choice for outdoor electrical connections exposed to condensation, water vapors or dust. The DryConn Black/Gray meets the conditions set by the most recent NEC Code Book, requiring a UL 486G listed connector to be used for all splices in wet and damp locations.
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486G listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
– Designation: KYN – See more details here.
• Black/ Gray Spec Sheet
• Low Voltage Wire Combinations
Installation
IMPORTANT: Turn off power before installing or removing connector.
Product to be used in accordance with local and national codes.
1. Strip wires 3/8” (9.5mm) except #16 and smaller. Strip wires 7/16” (11.1 mm).
2. Pre-twisting is not necessary. Hold stripped wires together with ends of insulation even. Lead stranded wires slightly.
3. Align any frayed strands or conductors.
4. Firmly push wire into connector and screw connector clockwise onto wire until tight. Do not reuse.
Specifications
• Connector Size: 21/32” x 5/16”
• Maximum Voltage: 600V max. building wire (1000V max. signs or luminaries)
• Silicone Sealant: -45°F to 400°F
• Temperature Rating: 105°C (221°F)
• Wire Range: Min #22/Max #12
• Wire Type: Copper/Copper
