• 100% water tested

• 150 psi (10,3 bar) rating

• Unique "reverse flow" porting design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure providing zero stress to prevent "stretching," a common cause of valve failure

• Diaphragms self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action

• Molded shock cone for smooth operation and reduction of water hammer

• Easy-to-use internal manual bleed lever; bleeds valve downstream; has stops for open and closed positions

• High efficiency M24E solenoid with stainless steel actuator

• High-strength glass-filled nylon body and cover with 1/4" stainless steel cover bolts and mating brass body inserts

• Non-rising flow control stem throttles valve from full open to closed position on flow control models

• Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups

• Do not use nominal voltage ratings listed above for sizing of valve wire